Airport Record

John B Connally Ranch Airport (8TA0)

Floresville, TX · private-use

1
Runway
530 ft
Elevation
4,050 ft
Longest Runway
TX
State

John B Connally Ranch Airport — Floresville, TX

Airport Overview

John B Connally Ranch Airport (8TA0) is a private-use airport in Floresville, TX, at an elevation of 530 ft MSL. It has 1 runway; the longest, 11/29, measures 4,050 ft (asphalt). John B Connally Ranch Airport is privately owned.

Per FAA records, 8TA0 has limited published services; confirm fuel and handling before arrival.

Jet Capability

The 4,050 ft paved runway at John B Connally Ranch Airport can accommodate light jets and turboprops. Actual suitability depends on aircraft type, runway conditions, temperature, and payload — pilots should consult aircraft-specific performance data for 8TA0.

This airport is not a public charter destination (private-use field); it is listed for reference. Browse our airport directory for charter-ready airports nearby.

Frequently Asked Questions

John B Connally Ranch Airport (8TA0) is located in Floresville, TX, at 530 ft elevation. Coordinates: 29.1358°, -98.2764°.

John B Connally Ranch Airport has 1 runway; the longest (11/29) measures 4,050 ft (asphalt).

John B Connally Ranch Airport's 4,050 ft paved runway can accommodate light jets and turboprops, subject to each aircraft's performance requirements, weather, and weight.

FAA records list no fuel service at 8TA0; confirm before planning a fuel stop.

8TA0 is a private-use airport (privately owned). Prior permission is required to operate here.